Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″
 |
Brand: Cheetah Model : APSAMB Customer Rating :
|
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″ Feature
- Collapses to less than 4″ from the wall
- Extends to a full 26″ from the wall
- High quality powder coat finish
- Built-in bubble level in wall plate
- Dual safety screws to lock TV Position
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″ Overviews
The APSAM universal articulating arm mount supports virtually any display up to 55″ with hole patterns up to 27.7″ horizontally and 19″ vertically. The APSAM also features a full 27″ of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5″ profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17″ wall plate which is specifically designed for installation to standard 16″ studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″ RelateItems
- Vanco Single Gang Bulk Wire Wall Plate White [120614x]
- OmniMount TRIAP Adjustable 3 Shelf Wall System w/ Cable Management
- Cheetah Mounts APTMM2B Tilt Wall Mount for 32″-55″ Plasma and LCD TVs and Displays
- OmniMount Tria 1 B – 1 Shelf Wall Furniture (Black/Dark Glass)
- OmniMount Tria-2 Hanging A/V Shelf System (Two Shelves, black)
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″ CustomerReview
I purchased this mount for a 32in Phillips flatscreen. The mount is heavy, sturdy and exactly what I was looking for. The only problem was the mounting hardware that came with it. The wall anchors were cheap and did not hold in the wall very well. This was a fairly easy fix by a trip to the local hardware. Then another surprise, the screws that were sent to attach the TV to the mount were not the right size. This resulted in another trip to the hardware. Now another issue. The only screws that would fit the TV screw holes were too short. Now I had to shorten the plastic mounting spacers that came with the unit. Good thing I have a bench grinder. A little adjustment to the length and they all screwed in fine. br /br /Overall this is a great mount. You can’t beat the price. It sits level, even at an angle in a corner. It is solid and heavy. I don’t have to worry about the TV falling off the wall or the mount. But a word of advice. Be prepared to go to the hardware for more mounting anchors and screws. (In my opinion 4 were not enough.) Also check the screws and spacers before putting the TV up on the mount. It will save you a few headaches and a trip or two to the hardware.
*** Product Information and Prices Stored:Mar 07, 2010 20:58:28
Available Check Price Now!
Related : home theater vizio 37 inch lcd soundsystemandhometheater
